Resetting The Saturation Indicator - Electrolux EFC 9670 Manual De Instrucciones

Ocultar thumbs

página de 80

/ 80
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

ease and char

Grease and char

ease and char

ease and charcoal filter

maintenance indicator

This hood is fitted with a device that

indicates when it is necessary to clean

the grease filter or the charcoal filter (if

the hood is used in the recirculation

version with a charcoal filter).

EFC 9670-9671-9673- 6670

On delivery, the hood is not supplied

with a charcoal filter, so the saturation

indicator will be disabled.

If the hood is to be used with a

(EFC 90670-60670:

charcoal filter (EFC 90670-60670:

(EFC 90670-60670: the

(EFC 90670-60670:

hood is supplied with a charcoal filter),

the saturation

indicator light must be enabled as

follows:

Set in "OFF

OFF" the hood.

OFF

Press buttons 4 4 4 4 4 and 5 5 5 5 5 simultaneously

and hold them for 3 seconds. At first

only the grease filter LED F F F F F will light up,

but when the charcoal filter LED C C C C C

lights up the saturation indicator will be

enabled.

To disable it: Press buttons 4 4 4 4 4 and 5 5 5 5 5

again simultaneously and hold

them for 3 seconds, until the charcoal

filter LED goes out.

coal filter

electrolux

electrolux control panel

Grease filter LED (F)

LED F F F F F will start to flash when it is time

to clean the grease filter.

Cleaning will be necessary after 40

working hours. Always comply with the

maintenance instructions for the grease

filter.

Charcoal filter LED (C)

The charcoal filter LED C C C C C will start to

flash when the charcoal filter needs to

be replaced.

This operation is necessary after

approximately 160 working hours.