Bodum BISTRO 11532 Instrucciones De Uso página 6

SPEED 4
To beat butter and sugar, angel food cake dough, cake mixes
and sugar icing.
SPEED 5
To beat light and airy masses such as mashed potatoes or
eggs.
HOW TO USE MOUNTING ATTACHMENTS
YOUR HAND
Before you mount your attachments please make sure that
MIXER
the speed setting (1) is in the 0–position and that your device
Is unplugged.
Push the desired attachment(s) into the insertion holes (5)
until they click into place.
If you are using the kneading hooks (4a, 4b) make sure you
insert them into the proper opening (5). The left kneading
hook (4a) will only fit into the left hole (5) with the visible step
in the hole.
The two whisks (3) will fit into both holes (5).
CONNECTING THE POWER
Before you connect the device to power supply, the attach-
ments must first be installed.
Before you connect the hand mixer to the power, make sure
that the speed setting (1) Is securely in the 0–position.
MIXING PROCESS Important: Once the mixer has run for 4 continuous minutes,
it must be turned off for 2 minutes to prevent the motor from
overheating.
Place the ingredients into a mixing bowl. If you are using
bowls made of glass or china, make sure that the attach-
ments do not come into contact with the sides and bottom of
the bowl.
Immerse the mixer attachments into the mass and choose
the desired speed setting (1). See Chapter "Speed settings".
To prevent splashing, make sure that the attachments always
remain immersed in the mass while mixing.
Upon completion of the mixing process, turn the speed con-
trol (1) to 0 and unplug the device.
10
If you do not need to use the mixer any long, place it on the
stand (6) with its four slip-proof silicone feet.
REMOVING THE Do not remove the mixer attachments until you have turned
ATTACHMENTS
the speed control (1) to 0 and have unplugged the device.
Press the unlock button (2) to remove the attachments. Make
sure that you hold the attachments by the shaft.
Note: In the interest of your safety, the attachments can be
unlocked only if you have turned the speed control (1) to 0.
MAINTENANCE Before you clean the hand mixer, unplug it.
AND CARE
Do not use any harsh cleaning substances.
CLEANING OF ATTACHMENTS
You can remove any excess food from the attachments with a
spatula made of rubber or plastic material.
You can clean the attachments by hand or in the dishwasher.
Any repairs have to be performed by an authorized service
center.
CLEANING THE HOUSING
Use only a moist cloth to clean any parts of the housing of
the mixer.
Never immerse the motor housing, mains plug and power
cord into water. Remember, the mixer Is an electrical device.
STORAGE Remove the attachments every time you are done using the
hand mixer.
While it is not in use, place the mixer on the stand (6).
Note: Always disconnect the hand mixer from mains while it
is not in use.
11
EN