General Guidelines - HQ-Power VDPL1210MHRGBW Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician should install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc.
The device should only be used indoors.
Use the appropriate power supply (see Technical Specifications below).
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
small and light LED moving head with powerful 4-in-1 CREE LEDs
runs extremely fast, with very bright output
suitable for clubs, stage, decoration, etc.
master/slave and sound control modes
DMX controlled by 9, 14, 16 or 28 channels
pan (630°) and tilt (270°), self-correcting
very smooth dimming, narrow punchy beam
green LCD display for easy configuration, auto switch off after 5 sec.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
indicator LEDs display
2
display
3
control buttons
4
power input + fuse holder
6.
Installation
Choose a suitable mounting spot. Mount the device using the included bracket. Connect the power cord
to the mains. Disconnect after use.
Mounting the device
Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
V. 02 – 26/09/2013
VDPL1210MHRGBW
5
ON/OFF button
6
power output
7
DMX output
8
DMX input
4
©Velleman nv
Tabla de contenido
loading

Tabla de contenido