Description (Fig. A); Electrical Safety; Assembly (Fig. D) - Tunturi E80 Manual Del Usuario

Ocultar thumbs Ver también para E80:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
English
-
Do not use or store the equipment in humid
surroundings. The air humidity must never be more
than 80%.
-
Only use the equipment for its intended purpose.
Do not use the equipment for other purposes than
described in the manual.
-
Do not use the equipment if any part is damaged or
defective. If a part is damaged or defective, contact
your dealer.
-
Keep your hands, feet and other body parts away
from the moving parts.
-
Keep your hair away from the moving parts.
-
Wear appropriate clothing and shoes.
-
Keep clothing, jewellery and other objects away
from the moving parts.
-
Make sure that only one person uses the equipment
at a time. The equipment must not be used by
persons weighing more than 135 kg (300 lbs).
-
Do not open equipment without consulting your
dealer.

Electrical safety

(Only for equipment with electric power)
-
Before use, always check that the mains voltage is
the same as the voltage on the rating plate of the
equipment.
-
Do not use an extension cable.
-
Keep the mains cable away from heat, oil and sharp
edges.
-
Do not alter or modify the mains cable or the mains
plug.
-
Do not use the equipment if the mains cable or the
mains plug is damaged or defective. If the mains
cable or the mains plug is damaged or defective,
contact your dealer.
-
Always fully unwind the mains cable.
-
Do not run the mains cable underneath the
equipment. Do not run the mains cable underneath
a carpet. Do not place any objects on the mains
cable.
-
Make sure that the mains cable does not hang over
the edge of a table.
-
Make sure that the mains cable cannot be caught
accidentally or tripped over.
-
Do not leave the equipment unattended when the
mains plug is inserted into the wall socket.
-
Do not pull the mains cable to remove the mains
plug from the wall socket.
-
Remove the mains plug from the wall socket when
the equipment is not in use, before assembly or
disassembly and before cleaning and maintenance.
Assembly instructions

Description (fig. A)

Your upright bike is a piece of stationary fitness
equipment used to simulate cycling without causing
excessive pressure to the joints.
Package contents (fig. B & C)
-
The package contains the parts as shown in
fig. B.
-
The package contains the fasteners as shown in fig.
C. Refer to the section "Description"
‼ NOTE
If a part is missing, contact your dealer.

Assembly (fig. D)

⚠ WARNING
Assemble the equipment in the given order.
Carry and move the equipment with at least two
persons.
⚠ CAUTION
Place the equipment on a firm, level surface.
Place the equipment on a protective base to
prevent damage to the floor surface.
Allow at least 100 cm of clearance around the
equipment.
Refer to the illustrations for the correct assembly
of the equipment.
‼ NOTE
Save the tools provided with this product, after
you completed the product assembly,
for future service purposes.
Workouts
The workout must be suitably light, but of long
duration. Aerobic exercise is based on improving
the body's maximum oxygen uptake, which in turn
improves endurance and fitness. You should perspire,
but you should not get out of breath during the
workout.
To reach and maintain a basic fitness level, exercise at
least three times a week, 30 minutes at a time. Increase
the number of exercise sessions to improve your fitness
level.
2 0
Tabla de contenido
loading

Este manual también es adecuado para:

E80 upright bike

Tabla de contenido