Sears Kenmore W11040140A Instrucciones De Instalación página 22

6.
Remove screws from door
Remove screws at top, bottom, and side of door (four screws).
Keep door screws separate from hinge screws as they are
diff erent sizes.
7.
Separate inner from outer door
Holding door over towel on dryer, pry inner door and lift
to separate it from outer door.
NOTE: Do not pull on door seal or plastic door catches.
8.
Rotate outer door
Rotate outer door 180º and set it back down on inner door.
Be certain to keep cardboard spacer centered between doors.
Reattach outer door panel to inner door panel so handle
is on the side where hinges were just removed. Insert four
door screws.
22
9.
Attach door hinges
Reattach door hinges to dryer door so that the larger hole
is at the bottom of the hinge.
10.
Remove door strike and door strike label
Door strike
Remove door strike and door strike label from dryer cabinet.
Insert the door strike into hole where door strike label was
removed and secure with screw. Cover original door strike
hole with door strike label and press fi rmly into place.
Door strike label