Technical Specifications - Hudora Expert 300 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Soccer Goal Expert 300
Item number: 76935
Dimensions when assembled: 300 x 200 x 120 cm
Purpose: Stable training goal for versatile throwing, shoo-
ting and goalkeeper training.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
19 x Goal posts | 1 x Goal net | 1 x Screw set (16 pcs.) | 7 x Pegs (for fixation) | 5 x
Lanyard for fixing the net / tension line | 8 x Hook and loop fastener for fixing the
net | 1 x Wrench (SW4) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Strangulation
hazard.
• WARNING! Do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connections for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
ASSEMBLY INSTRUCTIONS
Notice: The product must be assembled by 2 adults. Lubricate the connection
assemblies on the narrow ends a bit before starting the assembly. That facilitates
the assembly and extends the durability of the product!
1. Assembling the goalpost frame (fig. 1)
Mount the goal frame as shown in Fig. 1. Be sure to use the appropriately numbe-
red tubes. The frame tubes of the main frame 1-5 (posts and crossbar) have a
diameter of 75 mm and are first inserted into each other and then screwed. Use a
screw (14) with washer (15) as shown in the figures A+B at the top and bottom of
the crossbar and at the back of each of the two posts. The tubes of the rear goal
frame (tubes with 32 mm diameter) are connected via click connections. Make
sure that the bars engage audibly.
2. Assembly of the goal net (fig. 2)
The flags sewn into the net (13) indicate the upper corners of the goal. First attach
the net to the rear goal frame using the hook and loop fasteners (16) in the upper
corners as shown in Fig. 2. This prevents the net from falling down during the net
installation. Attach the goal net (13) to the main frame by threading the attaching
rope (18) alternately through the rear shaft profile on the main frame and the goal
loops. At the rear goal frame, thread the attaching rope (18) around the pipes and
the goal loops as shown. The ends of the attaching rope must then be knotted in
each case on the rear shaft profile or the frame tubes.
All images are examples of the design.
3. Stand locking of the goal
Finally fix the goal frame by means of the pegs (19) on the ground. Ascertain that
the ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and have
firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds
the goal must be saved by appropriate measures in another way against overtur-
ning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play
with an unsecured goal or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it in
a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information on
the product, replacement parts, solutions to problems and lost assembly manuals
at http://www.hudora.de/service/.
6/12