Cleaning And Care - Unold 18010 Instrucciones De Uso

3. Close the lid by pressing lightly
until it locks into place. The
locking mechanism prevents the
lid from opening accidentally
when pouring water.
4. Place the kettle upright on the
base.
5. Switch on the kettle by pressing
the ON/OFF button. The control
lamp at the bottom of the handle
will turn on.
6. When the water boils, the appli-
ance automatically shuts off.
7. To make the water stop boiling
earlier, press the switch upward.
8. Caution: The automatic shut-off
function works only if the lid is
properly closed.
9. If you want to boil more water,
please allow the appliance to cool
off for a few minutes.
10. The appliance features boil dry
protection. When operated wit-
hout water or with excessive sca-

CLEANING AND CARE

Before
always turn off the
appliance and unplug
it from the electrical
outlet.
Allow the appliance to
cool before cleaning
it.
11. The power cord storage compart-
cleaning,
1.
2.
Copyright UNOLD AG | www.unold.de
ling, the appliance shuts off auto-
matically. If this happens, please
allow the appliance to cool off
briefly before filling it with water
again or descale the appliance as
described in the chapter "Desca-
ling".
ment is on the bottom of the base.
It is used for storing the power
cord or to effectively shorten the
length of the cord.
Boiling
cause scalding. The-
refore, please handle
the appliance with
care when it contains
hot water. The appli-
ance becomes very
hot during operati-
on and maintains the
heat during some time
after disconnection.
Do not immerse the base, power
cord or kettle in water or other
liquids or wash them in the dish-
washer.
Wipe off the base and the kettle
with a damp cloth and a little
dishwashing detergent. Do not
use any abrasive scouring agents,
steel wool, metal objects, hot
water can
21