Orbegozo SV 1010 Manual De Instrucciones página 10

FILLING WATER
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
3. Pull down the cover of water filling mouth, and then fill water.
SPRAYING
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that time, you should keep
enough water in the water tank.
STEAM IRONING
1. Use steam ironing, turn the steam control to minimum position and set the temperature control at the
".", ".." or "..." position.
2. After the indicator goes out, turn the steam control to the suitable position, steam will be sprayed,
ironing can start.
DRY IRONING
Turn the steam control to minimum position, set the temperature control to the suitable position, you can
dry ironing.
STORAGE
After using, pull out the plug, pour out the remaining water, turn the steam control to minimum, turn the
temperature control to "min", let the iron cool down, put the iron on the safe and dry place vertically.
MAIN TECHNICAL PARAMETERS
Appliance
SV 1010
SV 1010
Voltage
110-120V/220-240V
Frequency
50-60 Hz
Power
1000 W
10