Anlapus Wireless NVR System Manual De Instrucciones página 3

1.3 Connect the System
①Install the antenna of the camera.
②Connect the camera to a power source (smaller 12V 1A power adapter).
③Connect the NVR to the router using a network ethernet.
④Connect the monitor to the NVR via HDMI or VGA port (this product does not include HDMI and
VGA video cables).
⑤Plug the Mouse to the USB port at the back panel
⑥Connect the NVR to a power source (larger 12V 2A power adapter)
⑦After the system starting, the display will show the real-time monitoring image of the camera.
Note: If the camera is outside the Wi-Fi range, you can connect the camera to the router using a
ethernet cable.
3