Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario página 16

Radio relay installation
Outdoor radio relay may be subjected to very high heat. It is necessary to use alkaline batteries of high quality resistant to temperatures
of +70 ° C (ex DURACELL PROCELL).
1 - Take off the pot by pulling the tab.
2 - Install the 4 AA batteries (supplied).
3 - Reconnect the battery holder.
4 - The red LED flashes. Put the container's cover back on.
1
The Radio relay ensures the connection between the equipment room (Control center) and the house (Indoor display and Internet relay). It should
be placed vertically (wall, pole) and away from any metal object (fence iron, zinc gutter) and not directly exposed to the sun to ensure a reliable air
temperature measurement.
Perform tests (reading the radio signal strength on the display, move the switch CALIB back of the indoor display to refresh the information) before
fixing it permanently. For very large distance between the pool and the house, it is possible to add an extra Radio relay (option).
calib on
14
2
AA
AA
Place the radio relay:
- directly into the earth (gardening)
- between two pots on a window sill
- through its support screwed to a pole or wall
- through his support using two cable ties
alarm
calib on alarm
3
or
To refresh the display of data, positioning the switch (on the back of the
Indoor Display) to "CALIB" then back "ON". After 10s, the radio signal
strength at each test positioning relay radio is refreshed.
4