Verathon GlideScope GO Manual De Funcionamiento Y Mantenimiento página 14

4. When you remove the GVL
ensure that all exterior surfaces are free of unintended rough areas, sharp edges,
protrusions, or cracks.
5. If desired to provide additional anti‑fog benefits, you may apply Dexide™ Fred™
Lite to the camera window on the Stat.
manufacturer's instructions.
PROCEDURE 5. ATTACH THE BLADE OR BATON
The blade or video baton attaches to the monitor's connector arm. The monitor rotates on
the connector arm, allowing you to set a starting angle to begin the intubation.
It is recommended that you leave the sterile, single‑use blade in the packaging while
connecting the blade and until you are ready to perform an intubation procedure.
1. Align the arrow on the monitor with the arrow on the baton or single‑use blade,
and then insert the blade/baton connector fully into the connector port on the
blade or baton.
Alignment marks
* Compatibility has been demonstrated for up to one hour of continuous exposure on video batons and Stats.
8
Stat from the packaging, visually inspect the Stat to
®
Use the solution according to the
*