Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ENGLISH
DESCRIPTION
1.- Main body of the appliance
2. Steam control
3. Safety cap.
4.- Accessory base
5.- Pilot light
ATTACHMENTS
6.- Measuring beaker
7. - Funnel
8.- Round brush
9.- Angle nozzle.
10.- Taper nozzle.
11.- Window-cleaning accessory
12.- Fabric accessory
13. Cloth
14. Flexible hose
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all products' packaging has
been removed.
Prepare the appliance according to the func-
tion you wish to use:
1. Fill the tank (up to maximum) using the
water measuring beaker provided. Do not
add any substances to the water, including
chemicals, cologne, detergent or similar.
This can seriously damage your device and
void the warranty.
2. Do not use the appliance when the tank
is empty. If the appliance stops producing
steam, this means that the water tank is
empty.
3. Always check that the surfaces, objects
and fabrics to be treated are resistant
to or compatible with high-temperature
steam. We recommend that you check
the manufacturer's instructions and that,
before using the equipment, perform a
test on a hidden part, or a sample, of the
surface to be treated.
4. When using the flexible tube, aim the initial
flow from steam cleaner/fabric steamer into
a container to remove any steam that may
have condensed inside the tube.
5. Do not tilt the steam cleaner/fabric steamer
more than 45º during use, as this could
cause boiling water to escape with the
steam.
6. Never direct the jet of steam at people,
animals or devices that have electrical
components.
7. Only use the measuring beaker to fill the
water tank.
8. To protect against the risk of electrical
shock, do not immerse the steam cleaner
/ fabric steamer in water or other liquids, or
handle it with wet hands.
9. Never tug on the power cord to disconnect
it from the power outlet. Hold the plug and
pull it out to disconnect it.
10. Disconnect the appliance when it is not in
use.
11. Do not operate the steam cleaner/fabric
steamer if the cable is damaged or if the
appliance has been dropped or is damaged
12. Touching the hot parts, the hot water or
the steam that the cleaner generates may
cause burns. Always be cautious when
there is hot water in the tank.
FILLING THE TANK WHILE USING THE
CLEANER
Make sure that the appliance is unplugged.
Unscrew the safety cap (3), fit the funnel in the
tank hole and fill
it with 1 measure of the beaker (6) (Fig. A).
Remember that the water should not go above
the mark on the beaker.
Unscrew the safety cap (3).
Plug in the steam cleaner and wait for the pilot
light to go off, telling you that the appliance is
ready for use.
IMPORTANT NOTE: Never refill the water tank
when the appliance is plugged into the wall
outlet.
USER INSTRUCTIONS
Connect the required cleaning attachment and
plug in the appliance.
The pilot light (5) will come on indicating that
the appliance is plugged in.
When the steam cleaner has the pressure re-
quired to operate, the pilot light (5) will go off
indicating that you can start to use it. This oper-
ation will take approximately 5 minutes. During
use, the warning light will go off and then come
EN
Tabla de contenido
loading

Tabla de contenido