Radio Operation - Premier SX-5257BT Manual De Instrucciones

BLUE-CONNECT OPERATION
Pairing Operation
1) Press BLUE-CONNECT button on the front panel or BT button on remote to enter BT mode.
2) Turn on the Blue-connect function on your device (e.g. smart phone).
3) Place your device in Blue-connect search range (10 meters). The phone will search for this unit.
4) Enter the list of found devices on the phone, and select the name SX-5257BT. Some devices may
ask you to confirm the selection by choosing OK/YES/PAIR.
5) For some devices, you may need to input "0000" (four Zero) as the passkey to make connection.
6) The player will beep once a connection is established.
7) Turn off the Blue-connect function on your device or unpair from the paired device to disconnect
the devices and follow the steps 2-4 above to connect to another device.
NOTE:
* When playing music through a phone, and a call is coming, music will stop automatically. When the
call ends, it depends on the setting of your phone whether the playback will resume playback or not.
* Some devices may connect immediately in pairing, some may take long time to connect.
* The unit can only be connected and playing content from one device at a time.

RADIO OPERATION

FM Frequency range: 87.5-108.0MHz. To get the best reception, adjust the FM antenna first.
1) Press the FM button on remote or on the front panel to enter FM mode.
2) Press MO/ST button on remote control to turn stereo on or off. If the signal is not strong enough,
you can not select turn stereo on.
3) Select stations
a) Directly input frequency:
Press the -/-- button on the remote control, input the digits to select the frequency directly.
E.g. 1, to select 89.90MHz, press "-/--" button, then press the number buttons 8, 8, 9, 0.
E.g. 2, to select 105.90MHz, press "-/--" button, then press the number buttons 1, 5, 9, 0.
b) Press the CH- or CH+ buttons to select the previous or next stations.
7 8
c) Press or buttons to tune the frequency up or down on the step of 0.1 MHZ.
7
d) Press and hold
frequency. It stops tuning when it found a strong signal station.
4) Auto-Search
Press the SEARCH button to search stations from the low to high frequency automatically.
Press this button again to stop searching.
5) Save Stations
Use the SAVE button to save the station.
a) Directly press SAVE button on remote control to save the current station into the current preset.
b) E.g. If you want to save 99.30MHz in 28th, press 2, 8 button to select the preset station, then press
-/-- button and input 9, 9, 3, 0, at last press SAVE button to save.
8
or buttons to auto skip to the previous or next available stations of strongest
12