Care And Maintenance - Kapro Prolaser 896 5-DOT Manual Del Usuario

Preventative Maintenance
• Store in a clean dry place, between 5°F – 131°F (-15°C – 55°C).
• Before moving or transporting the unit, ensure that it is turned off and
the Pendulum Locking Knob is locked.
• If the laser unit is wet, dry off with a dry cloth. Do not seal the laser in
the carrying case until completely dry.
• Do not attempt to dry the laser unit with fire or with an electric dryer.
• Do not drop the laser unit, avoid rough treatment, and avoid constant
vibration.
• Periodically check the calibration of the laser unit.
• Clean with a soft cloth, slightly dampened with a soap and water
solution. Do not use harsh chemicals, cleaning solvents or strong
detergents.
• Keep the laser apertures clean by wiping them gently with a soft
lint-free cloth.
• Remove batteries from the laser unit during lengthy periods of
non-use, and store in carrying case.
• Ensure that the laser unit is turned off before removing batteries.
Repairs
• See the Warranty section at the end of this manual.
• Do not take the Prolaser
any unqualified person to take the laser unit apart. Unauthorized
servicing may cause bodily injury, irreparably damage the laser unit,
and invalidate the warranty.
10

Care and Maintenance

896 5-DOT Laser Pointer apart or permit
®