Child Lock; Muting The Sound - Amica 10143.4TdDpHaQaXSp Manual De Instrucciones

OPERATION

5.7 Child Lock

To activate the child lock simultaneously
press and hold
MENU
approximately 3 seconds
displayed confirming the child lock function
has been set.
When the child lock safety device is active it
can only be deactivated by simultaneously
pressing &
MENU
(single extended acoustic signal) indicates
that a button or a control knob has been
operated when the child lock safety device
is set.
When the child lock device is set, it is not
possible to modify any programme and there
is no access to special functions. Operating
a knob when the child lock safety device is
set cancels the previously set function, child
lock symbol is flashing and an acoustic signal
is sounded. If the oven function control knob
,is set to "0", Child Lock safety device
symbol is on.
5.8 Operating error
If an operating error occurs (induced by the
user) a single extended acoustic signal will be
sounded. An operating error will result from
pressing any inactive buttons, turning the
control knob in wrong direction or performing
any action which will not lead to parameter
entry or modification.
and C buttons for
symbol will be
. buttons. Error alarm
C

5.9 Muting the sound

It is possible to mute the sound emitted by
the electronic programmer. To mute the sound
turn the control knob
press
MENU
CLEAN
turn the control knob
buttons.
MENU
CLEAN
It should be noted that when the sound is
muted no acoustic signal is sounded for
confirmation or when operating errors occur,
however acoustic signals of the electronic
programmer are sounded as normal.
5.10 Automatic power cut out
Electronic programmer will shut down the
appliance if the function selector knob
in position other than "0" for a certain time.
Depending on the temperature maintained
in the oven chamber, the appliance will shut
down after 2 to 10 hours.
The symbol
flashing when the electronic programmer has
shut down the appliance.
To switch on the appliance, turn the function
selector knob
59
anticlockwise and
buttons. To restore the sound
clockwise and press
(automatic power cut out) is
to "0".
is