Cafe CTS90DP4MW2 Manual De Instrucciones página 2

2 A
CUTOUT FOR SINGLE OVENS IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than ¾" (1.9 cm) thick,
shim both sides equally to establish the cutout width.
These ovens
are not
approved for
installations that
stack one single
wall oven above
another single
wall oven.
Opening
Between Inside
Walls Must be
at Least 28-1/2"
(72.4 cm) Wide
E
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line Center Line
30.5" (77.5 cm)
30" models
27" (68.58 cm)
27" models
Cutout – Cutout –
observe all observe all
dimensions and dimensions and
requirements. requirements.
2" (5.1 cm) Min.
Dimension Dimension Description
A Cabinet Width
B Cutout Width
C Cutout Height
D Clearance from cutout -
side edges*
E Clearance to Adjacent
Corners, Drawers, Walls,
etc., When Door Is Open
F Clearance from cutout -
top*
G Clearance from cutout -
bottom*
H Junction Box Location
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
H
Junction
B
Box
Location
(junction
box may
be located
in adjacent
cabinet)
F
22" (55.9 D
cm) Min.
to Bottom
G
of Junction
Box
Cutout Depth
23-1/2"
(59.7 cm) Min.
NOTE: Allow
1/4" (0.64 cm)
clearances from
side edges of
oven door.
A
27" Single Oven 30" Single Oven
27" (68.6 cm) 30" (76.2 cm)
25" (63.5 cm) min. 28 1 2 " (72.4 cm) min.
25 " (64.1 cm) max. 28 " (72.7 cm) max.
1 4 5 8
27 " (70.2 cm) min. 27 " (69.2 cm) min.
5 8 1 4
28 " (71.4 cm) max. 27 " (69.4 cm) max.
1 8 5 16
1" (2.5 cm) " (1.75 cm)
11 16
23" (50.8 cm) min. 23" (53.3 cm) min.
1" (2.5 cm) min. 1" (2.5 cm) min.
(1 " (3.2 cm) for PT9050,
1 4
ZET1S and ZET1P)
1" (2.5 cm) min. 1 " (3.2 cm)
1 4
8 " (22.2 cm) max. 9 " (24.1 cm) max.
3 4 1 2
right side only right side only
2 B
CUTOUT FOR SINGLE OVENS – UNDER COUNTER
NOTE: These ovens are only approved to be installed under the specific models as labeled on
the unit.
C
Recommended
Cutout Location
from Floor
32-1/2" (82.6 cm)
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
30.5" (77.5 cm) 30" models
27" (68.58 cm) 27" models
Cooktop
Cutout – observe
all dimensions and
requirements.
NOTE: One cooktop may be centered over either
oven in the side-by-side installation.
Dimension Dimension Description
A
B
C Clearance from cutout - top*
D Clearance from cutout - bottom*
E Clearance from cutout - side edges*
F
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
Continue to Section 4.
Center Line IMPORTANT: Maintain
a minimum distance
of 31-1/4" from the
top surface of the
countertop to the
wall oven platform to
Cutout – observe ensure that the cooktop
all dimensions and
and wall oven do not
requirements.
interfere with each other
(see picture).
2" (5.1 cm) Min.
27" Single Oven
Cabinet Width 25" (63.5 cm) min.
25 " (64.1 cm) max.
1 4
Cutout Height 27 " (70.2 cm) min.
5 8
28 1 8 " (71.4 cm) max.
1" (2.5 cm)
1" (2.5 cm)
1" (2.5 cm)
Junction Box Location 8 " (22.2 cm) max.
3 4
right side only
2-1/2" min. (6.4cm)
Cooktop
31-1/4" min.
(79.4 cm)
Wall Oven
SIDE VIEW
30" Single Oven
28 1 2 " (72.4 cm) min.
28 " (72.7 cm) max.
5 8
27 " (69.2 cm) min.
1 4
27 5 16 " (69.4 cm) max.
1" (2.5 cm)
(1 " (3.2 cm) for
1 4
PT9050
ZET1S and ZET1P)
1 " (3.2 cm)
1 4
" (1.75 cm)
11 16
9 " (24.1 cm) max.
1 2
right side only