Cafe CTD70DM2NS5 Instrucciones De Instalación

Built-In Wall Oven Flush Inset Installation Instructions
Please use this information along with the normal installation instructions to achieve the
of your appliance.
ADDITIONAL MATERIALS YOU WILL
NEED
• Clean Release Masking Tape – 2" width (min)
PREPARATION
1. Measure your cabinet to ensure all dimensions
match the specific flush inset requirements for your
model (see chart).
2. Apply Clean Release Masking Tape to all cabinet
faces for protection while installing the unit. For
each edge of the cabinet opening, start tape 1/2"
in from cabinet face and wrap around front face
to protect edges. Ensure tape extends around the
entire opening - top, bottom, and both sides.
INSTALLATION
1. Follow main instructions for product installation.
2. Remove Clean Release Masking Tape before
driving the mounting screws and trapping it in place.
3. Complete remaining steps of installation.
Cutout A Minimum cutout width with 1/8" side reveals
B Minimum cutout height with 1/8" top reveal, 1/4" bottom reveal
C Minimum cutout depth
Cleats D Bottom cleat thickness – extends full depth of cabinet
E Side cleat thickness
F Top cleat thickness
G Setback – all cleats
H Depth - side and top cleats
Electrical J Vertical from upper right corner
Junction Box
K Horizontal from upper right corner
All dimensions shown are in inches.
C
Top
Cleat
Side
Cleat
B
Bottom
Cleat
Side View
Allow 1/8" clearances from side edges of oven door.
30"
Single Oven Double Oven
CTS70DM CTD70DM
30 30
29 53-3/8
24-13/16 24-13/16
11/16 1/2
3/4 3/4
1-1/16 1-1/16
1-5/16 1-5/16
2-1/2 2-1/2
5-1/4 5-1/4
9-1/2 9-1/2
installation
Top View
G
H
A
F
J
ELEC.
K
E
D
Front View
27"
Single Oven Double Oven
CKS70DM CKD70DM
27 27
29-3/16 51-1/2
24-13/16 24-13/16
11/16 11/16
1 1
7/8 1-1/8
1-5/16 1-5/16
2-1/2 2-1/2
5-1/4 5-1/4
9-1/2 9-1/2
49-2000532 Rev. 0 12-18 GEA