Technical Characteristics; Installation And Pre Operation; Installation - Skymsen CMFL-550 Manual De Instrucciones

1.3 Technical Characteristics

Table -01
Characterístics
Voltage [ V ]
[ CV ]
Frequency
[ kW/h ]
Consumption
Height/Width/Depth [ inches ]
Net/Shipping Weight [ lb ]
Ready Dough Capacity [ lb ]
Roller Rotation [ rpm ]
Maximum Thickness [ inches ]
CMFL-550 LAMINATING DOUGH ROLLER
CMFS-550 KNEADING DOUGH ROLLER
(*) Frequency will be only the one indicated on motor characteristics label .
Model
CMFS-550 / CMFL-550

2. Installation

2.1 Installation
2.1.1 Follow the below instruction to use the Roller
2.1.2 The Dough Roller has to be installed onto a leveled surface.
A 13 mm spanner has to be available.
Pic.02
Place the Feeding Tray orifices upon the frame
threaded orifices .
Orifices
Threaded Orifices
Using the 13 mm spanner place the 4 screws
and tight them, fixing the Feeding Tray to the
frame.
.
Pic.04
CMFL-550 CMFL-550 CMFS-550
Single Phase Three Phase Single Phase
220 220 ou 380 220
3 3 3
2,2 2,2 2,2
68 1/2"x32 7/8"x54" 68 1/2"x32 7/8"x54" 68 1/2"x32 7/8"x54"
364 /480 364 /480 364 /480
33 33 33
80 80 160
51/64" 51/64" 51/64"
Load Chart
Maximum Load
15kg of dough
Pic.03
3
CMFS-550
Three Phase
220 ou 380
3
2,2
68 1/2"x32 7/8"x54"
364 /480
33
160
51/64"