Telcoma Automations FM400 Taxi Instrucciones De Uso página 24

GB
COPY FUNCTION (EDGE TAXI only)
The EDGE TAXI radio remote control is able to acquire from 1 to 5 different
codes from the same number of radio remote controls and combine them
with the 5 transmission keys.
Warning! only transmitters with frequency 433 MHz and fixed code
(No Rolling-Code) are enabled.
Procedure:
Hold down key 3 and at the same time press key 1 four times.
Then release key 1. The central LED will start to flash.
Once a valid code has been copied, the central LED
of the radio remote control will remain on for one
second and then start to blink quickly.
Now press one of the five keys, on which you wish to
memorize the code which was copied (e.g. key 2).
24
Place the remote control to be copied underneath
the new remote control as shown, then transmit
using the key to be cloned.