Telcoma Automations FM400 Taxi Instrucciones De Uso página 23

GB
3 LEDs on:
- all keys (1,2,3, 4 and 5 in fig.1) give repeated transmission.
- there is a different code combined with each key.
4 LEDs on:
- all keys (1,2,3, 4 and 5 in fig.1) give single transmission
(normal).
- there is a different code combined with each key.
To change the configuration, use keys 1 and 3,
select the option required and then confirm with the
central key (key 5).
To view the repetition time set, proceed as follows:
Press and hold down the keys shown for about 3 seconds, until
a number of LEDs (1 to 4) remain on.
Press the key shown (key 2); a number of LEDs will start to
blink:
1 LED blinking:
- maximum repetition time 10 seconds (5 transmissions)
2 LEDs blinking:
- maximum repetition time 20 seconds (7 transmissions)
3 LEDs blinking:
- maximum repetition time 30 seconds (8 transmissions)
4 LEDs blinking:
- maximum repetition time 40 seconds (9 transmissions)
To modify the time, use keys 1 and 3 then confirm with the
central key (key 5).
23