Description Of Components; Main Functions; Special Functions - Telcoma Automations FM400 Taxi Instrucciones De Uso

GB

DESCRIPTION OF COMPONENTS

Fig. 1: (1), (2), (3), (4) and (5) transmission keys.
Fig. 2: Battery panel opening and external dimensions in mm

MAIN FUNCTIONS

The default settings of the TAXI radio remote control are as follows:
-keys 1,2,3,4: single transmission
-key 5: transmission repeated for 20 seconds
The procedures for modifying these settings are listed in the next section;
for user code memorization, refer to the instructions of the radio receiver.

SPECIAL FUNCTIONS

This radio remote control enables users to configure the key functions
(repetition or single transmission) and the duration of repetition.
Press and hold down the keys shown for about 3 seconds, until
1 to 4 LEDs remain on.
This indicates the remote control's key configuration and
allows it to be changed if required:
1 LED on:
- outside keys (1,2,3 and 4 in fig.1) give single transmission
(normal)
- central key (5 in fig.1) gives repeated transmission.
there is a different code combined with each key.
2 LEDs on:
- all keys (1,2,3, 4 and 5 in fig.1) give repeated transmission.
- the same code (the one of the central key) is associated to all
the keys.
22