Tabla de contenido
Idiomas disponibles
Idiomas disponibles
bin-full probe. The unit will stop working. When ice cubes are removed from the ice
storage bin, freeing the bin-full probe, the red LED will remain flashing for 3 minutes,
then the unit will restart and return to the ice making mode.
Ice Making(Green) LED
2.
When this is lit, the unit is working in the ice making mode controlled by a
temperature probe on the evaporator. When the green LED flashes, the unit is working
in the ice making mode controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the ice-full
probe.
4. Mode button: Mainly for service. When this is pressed, the ice making mode changes
to ice harvest mode or vice versa. The mode can be judged from the status of the green
and yellow LEDs.
5. Adjust button: Mainly for service. When this is pressed over 3 seconds, the unit will
enter the Ice Size Adjustment mode. The mode can be judged from the status of the
yellow LEDs.
Ice Size Adjustment Guide:
1. Press and hold the "Adjust" button for at least 3 seconds.
Size Adjustment mode. The "HARVEST" LED (yellow) will be blinking continuously
during the ice size adjustment.
to adjust the ice size.
2. While in the Ice Size Adjustment mode, press the "Clean"
button for the desired ice size.
Smaller ice setting:
By pressing the "Clean"
"ICE" LED (green) will flash as you lower the ice size and will finally be blinking at
the setting of smallest ice size.
Larger ice setting:
By pressing the "Mode"
"BIN FULL" LED (red) will flash as the larger size is set and will blink when the
setting of largest ice size has been reached.
After 10 seconds without any operation, the unit will return to the previous mode.
NOTE: During the ice size adjustment, the "BIN FULL", "ICE" and "HARVEST"
LEDS blinking all at once indicate that the unit is in the default factory setting of the
ice size.
Ice making indicator light
:
Release the button when the LED blinks continuously
(-)
button, you can decrease the size of the ice cubes. The
(+)
button, you can increase the size of the ice cubes. The
23
The unit will enter the Ice
(-)
button or the "Mode"
(+)
Capítulos
Tabla de contenido
