Entering New Timings; Power Saving Function - Sony Trinitron Multiscan 20sfII Manual De Instrucciones

Adjustments
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset the brightness, contrast, size,
center, pincushion, and color
temperature adjustment data at once (for
the received signal)
Press the RESET button with something like a pen for 1
second when no OSD is shown.
RESET
To reset all adjustment data to factory-
preset levels
Press and hold the RESET button for more than 2 seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
RESET
8

Entering New Timings

When using a video mode that is not one of the 10 factory
preset modes, some fine tuning may be required to optimize
the display to your preferences. Simply adjust the monitor
according to the preceding adjustment instructions. The
adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 15 user-defined modes can be stored in memory.
If the 16th mode is entered, it will replace the first.

Power Saving Function

This monitor meets the power saving guidelines set by the
EPA Energy Star Program as well as the more stringent
TCO95 (NUTEK) guidelines. It is capable of reduced power
consumption when used with a computer equipped with
Display Power Management Signaling (DPMS). By sensing
the absence of the sync signal coming from the computer, it
will reduce the power consumption as follows:
CAUTION: The Power Saving function will automatically
put the monitor into Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.
Power
State
Mode
consumption
Normal
100%
1
operation
Standby
approx.
(1st step of
2
70%
power saving)
Suspend
approx.
(2nd step of
3
10%
power saving)
Active-off
approx.
(3rd step of
4
4%
power saving)
0%
Power-off
5
Required POWER
u Power
resumption SAVING
indicator
time indicator
— off green on
approx.
orange on green on
3 sec.
approx.
orange on green on
3 sec.
approx.
orange on off
10 sec.
—
off off