Safety Infomation - Sartorius PT-15 Instrucciones De Manejo

Safety Information
The PT portable meter complies with
the European Council Directives as
well as international regulations and
standards for electrical equipment,
electromagnetic compatibility, and
the stipulated safety requirements.
Improper use or handling, however,
can result in damage and/or injury.
– To prevent damage to the equipment,
read these operating instructions
thoroughly before using your portable
meter. Keep these instructions in a safe
place. Please observe the following to
ensure safe and reliable operation of
your portable meter:
! Do not use this equipment in hazardous
areas/locations.
! If you use electrical equipment in
installations and under ambient condi-
tions requiring higher safety standards,
you must comply with the provisions as
specified in the applicable regulations
for installation in your country.
– Use Sartorius accessories, as these are
optimally designed for use with your
portable meter.
– The buffer solution used for standardi-
zation must match the stored values
exactly.
4
– Note on installation:
The operator shall be responsible for
any modifications to Sartorius equip-
ment and must check and, if necessary,
correct these modifications. On request,
Sartorius will provide information on
the minimum operating specifications
(in accordance with the Standards listed
on page 17 for defined immunity to
interference).
Industrial protection ratings for the
housing:
– Portable meter: IP65
$ If you have any problems with your
portable meter:
contact your local Sartorius office,
dealer or service center.