Troubleshooting - Daga MC-1500 Instrucciones De Uso

ENGLISH
Follow the instructions below in order to start up the massage
appliance:.
1. Remove the product from its original packaging taking special
care not to damage any of its parts. Do not use excessive force to
remove the product from the box.
2. To massage the cervical region, place the massage appliance on
the back of a high chair or armchair at the height of the cervical
region. Secure it in place using the elastic strap on the cover of the
product. Fig 1. To massage the lumbar region, place the massage
appliance at the base of a chair or armchair at the height of the
lumbar region. Fig 2. To massage the legs, place the appliance on
a horizontal surface at the height of the legs you wish to massage.
Fig. 3.
3. Connect the appliance to the mains.
4. Switch on the appliance by pressing the on/off button.
5. Enjoy the massage.
The duration of each session is 15 minutes. After this time, the
massage appliance will automatically switch off to avoid overloading
the treated regions. If you wish to have an additional session, rest
for around 15 minutes before starting again. The appliance can be
switched off at any moment by holding down the on/off button for 3
seconds. While the appliance is running, the heat function can be
switched on or off by quickly pressing the on/off button.

TROUBLESHOOTING:

Possible operating anomalies
INCIDENT
The mas-
sage heads
do not
move.
The heads
turn very
slowly.
The
heating
function
does not
operate.
10
Manual Cojí n Shiatsu MC-1500.indb 10
CAUSE
The appliance is not
connected to the
power supply.
Appliance is con-
nected to an inco-
rrect voltage supply.
Appliance not swit-
ched on.
The appliance is
damaged.
The pressure applied
on the heads is ex-
cessive.
It is not switched
on.
One or more com-
ponents have been
damaged.
SOLUTION
Connect the appliance to the
mains and switch on.
Connect the appliance to a
socket that supplies the vol-
tage specified on the product
label.
Switch on the appliance
using the on/off button
Contact the Daga technical
service.
Lean on the heads, applying
less pressure.
Press the on/off button quickly
to activate the heating
function. The infrared lights
should come on .
Contact the Daga technical
service.
.
14/1/16 11:19