Technical Characteristics; Monitor (Mn Bordy); Power Supply; Outside Station (Pl Bordy) - Extel BORDY Instrucciones De Uso

7. TECHNICAl CHARACTERIsTICs

a. Monitor (MN BORDY)
• Reference: 810217
• Power supply: 17 V
• Consumption: 7.3 W
• Screen: 2.4" - 6 cm
• Resolution: 480 x 272
• Size (mm): 220x220x21
b. Power supply
• Adapter: 100-240 V∼, 50/60Hz ; 17 V , 1.5A
If the power supply cable has to be cut, ensure that polarity is respected (fig. 7)).
c. Outside station (PL BORDY)
• Reference: 820217
• C-MOS colour camera: 960 x 480
• Viewing angle: 76°
• Directional lens
• Sensitivity: 3.16V/ Lux.sec
• Working temperature (approx.) -10°C to +45°C.
• Protection index: IP44
• Size with shield (mm): 160 x 120 x 40

8. OpTIONs

• All Extel electric catches
• All Extel electric locks
• All Extel motors

9. TECHNICAl sUppORT - WARRANTY

Fault
• The monitor does not
light up
• Bad image and/or bad
sound
• Image is too bright
• Blue screen, no
ring tone
• No sound from the
outside station
GB5
Cause
• The monitor is not connected to
a power source
• Environment
• Wiring too short
• Camera position
• Installation
• Insects
CFI EXTEL BORDY - 2015
Solution
• Check that the adapter plug is correctly
fitted
• Check that the wires used are the correct
size and that the connection wires for the vid-
eophone are not in the same sheath as the
230V.
• Use at least 5 m of wire
• Do not expose the lens of the camera
directly to sunlight or to a reflective surface.
• Check the settings
• The wires connecting the monitor and the
outside station are reversed (1 and 2)
• Check the positions on the terminal block
• Check that the hole for the microphone on
the outside station is not blocked