Connection Additional Monitor(S) In A Dwelling; Technical Characteristics; Options - Extel WEVPMH 001 Instrucciones De Uso

11 CONNECTION OF ADDITIONAL MONITOR(S) IN A DWELLING
The additional monitor(s) (max 2 per dwelling) connect as the main ones.
Respect the number of distributor and power supply unit as indicated on the main wiring diagram.
Dwelling 2
(switch in 120 position)
monitor 2
Dwelling 1
monitor 1
L+ L- L+ L- ML+ ML-
+ -
power supply unit
Parameterisation to perform:
Before registering the monitors on the roadside panel, it is recommended to modify the number of characters to type in
the list of names.
To do so, enter the "configuration" menu, on the keypad type #8001, and then enter the administrator code (66666666
Then type "7" select "2" then validate by #.
Only 2 characters are to be typed on the keypad to call a dwelling. (In the event of a building of more than 99 dwellings, you
have to call our phone support for another procedure).
Now you can register the monitors on the roadside panel by referring to the chapter 5,c.
You have to impose a special code for the additional monitors.
If the main monitor has the No. XX, you have to register the additional monitor under the No. 1XX, and the 2nd additional
one under the No. 2XX.
It is mandatory to indicate to the system that some dwellings have several monitors.
To do so, refer to chapter 9, in the "option management" menu, and then chapter 6 "additional monitors".
additional monitor max in one or several dwellings.
(In the case of an installation for dwellings with 1 additional monitor and others with 2, you have to enter the max. number,
namely 2).
CFI EXTEL WEVPMH 001 - 03/2010 - V1
16GB
to the next distributor
(last distributor switch in HI position)
Dwelling 3
distributor 1
monitor 4
(if single distributor:
switch in HI position)
monitor 3
ML- ML+
P+ P-
roadside panel/camera
P+ P-
back of the panel/
camera
12

TECHNICAL CHARACTERISTICS

References: VPMHMN001
Monitor
Power supply: 18 VDC
Power consumption: 8 W
5' 13 cm LCD colour screen
Resolution: 960 x 234 points
Dimensions (mm): 210 x 160 x 30
Reference: VPMHPS001
Power supply unit
Power supply: 230 VAC
Supplied with 3 back-up batteries
Reference: VPMHDS001
Distributor
Power supply: 18 VDC
Power consumption: 13 W
Roadside panel (camera)
References: VPMHPL001
1/3' CCD colour camera
Camera angle: 55°
Rotating lens
Operating temperature (approx.): -10°C to +45°C.
Protection index: IP44
Dimensions front panel (mm): 410 x 163
Screen: LCD 128 x 128 pixels
Power supply: 18 VDC
Power consumption: 9 W
13

OPTIONS

WEVPMHMN 001: Additional monitor
WEVPMHDS 001: Additional distributor (for 4 monitors max)
WEVPMHPS 001: Additional power supply unit (for 16 monitors max)
WE 8111 BIS: command interface for an automatic gate opener.
All Extel electrical strikes: WECA 90201, WECA 90301, WECA 90501
All Extel electrical locks: WE 5001/2 BIS, WE 5002/2 BIS, WE 5004/2 BIS.
All Extel automatic gate openers: WEAT V, WEAT B and WEAT C.
WE 205 BC BIS: 5m RJ45/RJ45 cord
WE 210 BC BIS: 10m RJ45/RJ45 cord
WE 828 BIS: 25 m Ethernet cable
WE 825 BIS: 5 RJ45 micoplugs
WE 845 BIS: clamp for wiring RJ45 microplugs
CFI EXTEL WEVPMH 001 - 03/2010 - V1
17GB