REXROTH 3 842 546 991 Manual Del Usuario página 98

46/52 Maintenance
4. Clean old lubricants and
dirt from the 4 guide
rods and the spindle.
Apply fresh lubricant
with a brush or cloth
(for lubricants, see
section 16.2 titled
"Recommended
lubricants").
Move the mounted
lifting accessory to the
lubricated area, switch
the unit off and secure it
against being switched
on again (pull out mains
plug).
Clean and lubricate the
area that was concealed
until now.
5. Clean and lubricate the
drive gear wheels (C).
6. Install the paneling
(see page 42, B).
7. Install the hood (see
page 42, A).
8. Move the mounted lifting
accessory 2x from the
lowest to the highest
position and back.
Bosch Rexroth AG, MPS, 3 842 358 709/2016-07
Fig. 26: Lubricate the guide rods and spindle
4
4
358 709-31