REXROTH 3 842 546 991 Manual Del Usuario página 79

The slotted nuts and screws
for installing the attachment
plate are pre-installed in the
slots of the runner.
Please note:
1
) This slotted nut
serves as downward
securement and is
bonded with Loctite 601.
Do not loosen or
remove!

Install the attachment
plate.
2
) The slotted nut for
fastening rests on the
securing slotted nut.
This ensures that upon
reaching the safety area
(see page 37) there
is still 120 mm ground
clearance under the forks.

Install the forks on the
left and right of the
attachment plate. Align
the forks centrally in
relation to the central
axis of the case lifter.
3
) Red cover profi le
marking the safety area.
3. Install the attachment plate and the forks according to your application.
– Tilting axes (see page 27, fi g. 15)
– Floor roller with 135 mm ground clearance (see page 28, fi g. 16)
– Floor roller with max. 195 mm ground clearance (see page 29, fi g. 17)
2
(4x)
3
)
Fig. 15: Installation of attachment plate, forks for cases
1
1 )
ISO 4762 M8x14-10.9
3
0 2
)
SW6
M =22 Nm
D
4
)
3 842 358 709/2016-07, MPS, Bosch Rexroth AG
Installation 27/52
3 842 528 735
SW6
1
2
SW6
M =10 Nm
D
358 709-28