Rear Panel - Sony SSM-125 Manual De Instrucciones

Rear Panel

ON OFF
ON OFF ON OFF
IN OUT IN OUT
VIDEO A connectors and
7
75Ω ON/OFF switch
VIDEO A DC CLAMP
ON
OFF
ON OFF
OUT
IN
9
0
V-LIN (vertical linearity)
and HEIGHT controls
8
VIDEO B connectors and
75Ω ON/OFF switch
VIDEO B
ON OFF
OUT
IN
DC CLAMP ON/OFF switch
7 VIDEO A connectors and 75Ω ON/OFF switch
8 VIDEO B connectors and 75Ω ON/OFF switch
Two video input connectors (VIDEO A and VIDEO B) for
the composite video signals and their loop-through output
connectors.
To monitor the signals input to the VIDEO A IN connector,
keep the INPUT select switch released (øA).
To monitor the signals input to the VIDEO B IN connector,
keep the INPUT select switch released (ØB).
IN connector (BNC type)
Connect the video output of a VCR, video camera, or
another monitor for loop-through connection.
OUT connector (BNC type)
Connect the video input of a VCR, video camera, or another
monitor for loop-through connection.
75Ω ON/OFF switch
Set this switch to ON when only the IN connector is used.
Set this switch to OFF, when both the IN and OUT
connectors are used together for a loop-through connection.
9 DC CLAMP ON/OFF switch
When the switch is set to OFF, the black and white areas
may become slightly gray.
To reproduce clear black and white definition, set this switch
to ON.
0 V-LIN (vertical linearity) and HEIGHT controls
For special adjustments by qualified personnel only.
7