Promax US TV EXPLORER II Manual De Uso página 80

NOTE: The symbol
instrument has detected a saturation condition for analogue signals in
the currently channel on tune. This symbol also appears, when the color
subcarrier signal (Burst) does not contain information and therefore the
images are shown in black and white.
If it appears a digital television signal (DTV) on screen, for about some seconds,
the following parameters will be shown: channel number or satellite name, frequency,
active channel plan and satellite downlink frequency. The following data box shows the
video data: type of video coding (MPEG-2 or MPEG-4), video bit rate (only for
MPEG-2), video program identifier (VPID) and the TS identifier (TSID). One other data
box contains audio information: type of audio coding (MPEG-1, MPEG-2 or AC-3), audio
bit rate, audio program identifier (APID) and language (e.g. en). The last box located in
the same column shows the network data: network name and/or satellite orbital
position, service name, netwok identifier (NID) and service identifier (SID).
On the left column appears the type of DVB signal, a window showing the signal
decoded (only for MPEG-2) and finally a data box stating if the emission is encrypted or
free (SCRAMB or FREE), when the service supports interactive TV (MHP, i.e.
Multimedia Home Platform).
DTV
(FREE)
When pressing the cursor arrow
window again. In order to fix on screen this window the vertical cursors
must be pressed up to select the OSD:OFF field, so press rotary selector
switch it to OSD:ON.
Page 72
at the upper corner on the screen indicates that the
8-VSB FCC
F:
VIDEO:
MPEG-2
MP@ML
VPID:
AUDIO:
AC-3
APID:
NETW.:
- - -
OSD: ON
VTV 1
NID:
Figure 53.- Digital channel monitoring.
USER'S MANUAL. US TV EXPLORER
C:
181.25 MHz
4004 kb/s
720x480i 4:3
111 TSID: 97
192 kb/s
112 LANGUAGE:
12674 SID:
[6] key will appear the tuning information
A08
25Hz
en
801
[6] key
11/2013
II
[1] to