Channel Plans - Promax US TV EXPLORER II Manual De Uso

USER'S MANUAL. US TV EXPLORER
5.9

Channel plans

The signal automatic identification process as much as the exploration of the
frequency spectrum could yield the generation of new customized channel plans
relative to the usual work locations of the meter equipment.
In this way the characterization of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the US TV EXPLORER
analyses all the present channels in the active channel plan, which acts as pattern
channel plan specified by means of the option CHANNEL SET from configuration
measurement menu: CONFIGURATION
If during exploration or automatic identification process the
new parameters for some channel or frequency a new list will be generated with the
information updated and will be saved with the name of the original channel plan
followed by the extension: _0x. (See the following Figure).
FCC:
A02 A03
EXPLORER
FCC_01:
A02
FCC:
A02 A03 A04
AUTO ID
FCC_01:
A02
Figure 10.- New channel plan generation process.
Those channels that have not been identified during the exploration process are
removed from the new generated channel plan. The user can save this table in the
memory, modify its name and later use it by means of the CONFIGURATION
menu.
11/2013
II
[17].
A04 A05 A06 A07 67 68
A04 A07 15 65 68
A05 A06 A07 67
A03 A04 A05 68 69
EXPLORER
STD CHANNEL PLAN
69
+ PARAMS. NEW CHANNEL PLAN
STD CHANNEL PLAN
68 69
+ PARAMS. A04
II
detects
[17]
Page 33