Analogue/Digital Tv: Measuring The Carrier / Noise Ratio (C/N) - Promax US TV EXPLORER II Manual De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USER'S MANUAL. US TV EXPLORER

5.14.5 Analogue/Digital TV: Measuring the Carrier / Noise ratio (C/N)

The US TV EXPLORER
ways, according to the carrier type and the used band:
A)
Terrestrial band, analogue carrier
Carrier level is measured using a quasi-peak detector (230 kHz BW). Noise level
is measured with an average detector and corrected to refer it to channel
equivalent noise bandwidth (according to the definition of the selected standard).
B)
Terrestrial band, digital carrier
Both measurements are done with an average detector (230 kHz) and the same
corrections are introduced on them (bandwidth corrections).
C)
Satellite band, analogue carrier
Carrier level is measured using a quasi-peak detector (4 MHz BW). Noise level is
measured with an average detector (230 kHz) and corrected to refer it to channel
bandwidth.
D)
Satellite band, digital carrier
Equivalent to case B but now using the 4 MHz BW filter.
On selecting the Carrier / Noise measurement mode the screen displays the
following information:
0
FREQ:
CH:
Figure 28.- Carrier-to-noise ratio measurement (C/N).
11/2013
II
II
carries out C/N ratio measurement in four different
10
20
168.25
MHz
LEVEL:
S10
»
C/N
V/A:
FM DEV:
30
40
78.2
dBµV
40.1
dB
16.2
dB
- - -
kHz
Page 51
Tabla de contenido
loading

Este manual también es adecuado para:

Us tv explorer

Tabla de contenido