SICK PLS Serie Manual Del Usuario página 183

PLS
Properties
RESET / RESTART input
required: command unit for operating
mode with restart inhibit: NO contact
to VCC_EXT (Uv), dynamically
monitored
Input resistance at HIGH
Voltage for HIGH
Voltage for LOW
Current consumption (HIGH)
Start impulse current (when τ = 100 µs) 3.0 mA
Static input current
Current consumption (LOW)
Start impulse current
(when τ = 100 µs)
Static input current
Time behaviour of scanner
(safe restart detection)
LOW level prior to restart
HIGH level during restart
LOW level after restart
Warning field output (PNP)
Voltage: Warning field clear
Voltage: Warning field clear
at Uv = 16.8 V
Switching current
(referred to EXT_GND)
8 008 321/M844/06-05-02 Operating Instructions • PLS
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Data
min. type
5.9 kOhm
15 V
0 V
2.2 mA
120 ms
120 ms
> 1 ms
Uv - 2.5 V
13.4 V
GB
max.
Uvmax
4.2 V
6.6 mA
5.2 mA
0.9 mA
0.5 mA
5 s
100 mA
183