Service And Repairs - Hitachi CC 14SC Manual De Instrucciones

6. Lubrication.
Lubricate the following sliding surfaces once a month to keep the power tool in good operating condition
for a long time (see Fig.1 and 2). Use of machine oil is recommended.
Oil supply points:
*Rotary portion of shaft.
*Rotary portion of vise.
*Rotary portion of vise-jaw.
*Quick vise.
7. Cleaning.
Periodically remove chips and other waste material from the surface of the power tool with a damp, soapy
cloth. To avoid a malfunction on the motor, protect it from contact with oil or water.

SERVICE AND REPAIRS

All quality power tools will eventually require servicing or replacement of parts because of wear from normal
use. To assure that only authorized replacement parts will be used, and that the double insulation system will
be protected, all service (other than routine maintenance) must be performed by an AUTHORIZED HITACHI
POWER TOOL REPAIR CENTER, ONLY.
NOTE: Specifications are subject to change without any obligation on the part of HITACHI.
English
15