Orbegozo CR 5029 Manual De Instrucciones página 15

CR 5029
There may be a slight difference between the displayed and the actual room temperature. This is due to the
design and does not mean that the appliance is defective.
Time-delayed Switch-off
You can set a time-controlled switch-off for the appliance.
Use the button to select a time setting between 01 and 24 hours.

Upon expiry of the timer, the appliance will switch off automatically.

Switch Oscillation On/Off
Press the button to switch on oscillation. The appliance automatically rotates in the range of about 90
degrees. The indicator lamp lights.
Switch Display On/Off
Press the button to switch the display and the indicator lamps on or off.
OVERHEAT PROTECTION
The appliance features an overheat protection mechanism causing the appliance to switch off automatically
in case of overheating.
If the overheat protection mechanism causes the appliance to switch off again after a short period, let the
appliance cool down for approximately ten minutes before using it again. If the problem persists, get in
contact with our technical service.
REMOTE CONTROLLER
The range of the remote controller is limited. When using it, please ensure that there are no obstacles
placed between it and the sensor on the appliance.
In order to change the battery, open the compartment on the bottom of the remote control and replace it
with a battery of the same type (CR2025). Ensure correct polarity and make sure to close the battery lid.
CLEANING AND MAINTENANCE
Unplug from the outlet before cleaning. Allow to cool before cleaning the appliance. To clean the surface
use the soft wet cloth (or cloth with some scour). Make sure that do not pour water on to the appliance. Do
not use any organic solvents such as gasoline or toluene.
If you do not use the appliance for a long time, wipe off the surface and store the appliance in the original
packing box at a well-ventilated place. Avoid dampness and impacts.
15