Use; Starting Up The J93 Clamp; For The J93 And J193 Clamps - Chauvin Arnoux J93 Manual De Instrucciones

2.1. STARTING UP THE J93 CLAMP

„ Set the switch to
„ Set the switch to ON. The indicator lights.

2.2. FOR THE J93 AND J193 CLAMPS

„ Connect the clamp to the device, on one of the current inputs.
V1 V2 V3 N
POWER & ENERGY LOGGER
„ Switch on the device.
„ Adjust the zero by watching the display of the device and turning the zero adjustment knob until the device displays 0.
n order to check that the battery is OK. If the indicator lights, the battery must be replaced (see §4.2).
I1 I2 I3
MODEL PEL 103

2. USE

ZERO
ON
OFF
300 V CA T IV
ZERO
600 V CA T III
ON
OFF
300 V CA T IV
600 V CA T III
ZERO
ON
OFF
300 V CA T IV
600 V CA T III
20
C.A 8336
POWER & QUALITY ANALYSER
?
+
QUALI
STAR