Using Your Camera - Velleman CAMSETW13 Manual Del Usuario

Go to [My Computer] → [Properties] → [Hardware] → [Device Manager] → [Sound, video and game controllers] to
check if the software has been installed. If you cannot find the device or if there is a yellow exclamation mark before the
device, please disconnect the receiver and connect it again.
For Windows ® 2003 Users Only
Go to [Desktop] → [Properties]. Following window will pop up. Select
[Settings] and click [Advanced].
Click the [Troubleshoot] tab and slide the arrow to the far right. Confirm
by clicking [Apply] and click [OK] to finish. The application is now ready
for use.

7. Using Your Camera

Install both your camera and receiver. Select a channel on both the camera and the receiver (make sure to select the same
channel on both devices). Double-click on the CameraViewer icon on your computer's desktop. Following interface will be
shown:
• The Operation Bar
1. channel buttons 1 to 4
2. channel on/off
3. channel loop on/off
4. mute button
5. split screen button
6. snapshot button
7. zoom in
8. full screen button
9. IR detection on/off
10. schedule monitoring on/off
CAMSETW13
11. IR detection configuration
12. schedule monitoring configuration
13. volume setting
14. pause button
15. record button
16. zoom out
17. sound detection on/off
18. sound detection configuration
19. record file management
5 VELLEMAN