Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Centro Planchado CP136_Maquetación 1 01/03/16 09:53 Página 31
Do not unscrew the boiler cap unless you are sure that the applian-
ce has been unplugged from the outlet (fig. 2).
When water in boiler is lack," Lack warter" pilot lamp(16) lights up,
Unscrew safety cap (8). Pour 1.0litres (12) of normal
tap water into the tank (figure 2) by means of funnel. Screw the
safety cap on tightly (8).
How to start the appliance
Check that the voltage indicated on the data plate corresponds with
that of the local network before connecting the appliance to the
supply mains.
The appliance uses ordinary tap water.
If the water is very hard (hardness higher than27 degrees French).
We suggest using distilled or demineralized water.
Always remove the plug from the power socket before filling the boiler.
Unscrew the cap (8) and pour in about 1.0 litres of water. (See fig.2)
After closing the cap. Connect the appliance to the power supply.
- 31 -
E
N
G
L
I
S
H
Tabla de contenido
