Menu Button - JVC DT-V21G11 Manual De Instrucciones

Daily Operations (cont.)

6 MENU button

Activates/deactivates the display of the MAIN MENU
(☞ "Menu Operations" on page 13).
7 COLOR OFF button/lamp
Displays only the luminance signal.
●
This function does not work for RGB input signals.
8 1:1 button/lamp
Displays the picture in the original resolution of the input signal.
●
The aspect ratio of the picture may change depending on the
input signal.
9 AREA MARKER button/lamp
Displays/hides the area marker.
● Select the style of the area marker in "MARKER" of the MAIN
MENU (☞ page 15).
●
This function does not work when displaying the picture in the
1:1 mode.
●
This function works only when displaying the picture in 16:9
aspect ratio.
● This function does not work when "AREA MARKER" or "R-AREA
MARKER" is set to "OFF" in "MARKER."
p SAFETY MARKER button/lamp
Displays/hides the safety marker.
●
Adjust the area of the safety marker in "MARKER" of MAIN
MENU (☞ page 15).
●
This function works only when displaying the picture in 16:9
aspect ratio.
●
This function does not work when "SAFETY MARKER" or
"R-SAFETY MARKER" is set to "OFF" in "MARKER."
q SCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of the video signal.
● This function does not work for RGB input signals.
●
Each time you press this button, the picture changes in the
following order.
RGB (Normal screen)
Blue screen
w ASPECT button/lamp
Changes the aspect ratio of the picture from 4:3 to 16:9 when the
picture of 16:9 aspect ratio is squeezed into 4:3 format signal.
●
To return to 4:3, press the button again.
● This function does not work when displaying the picture in the
1:1 mode.
e SCOPE button/lamp
Displays/hides the indication of the wave form monitor and
vector scope (☞ "SCOPE SETTING" on page 17).
● Each time you press this button, the window changes in the
following order.
No display
Vectorscope
r T.C. (time code) button/lamp
Activates/deactivates the display of the time data (time code)
contained in the SDI signal (☞ "On the Information Display" on
page 11).
●
Select the time code type in "INFORMATION" of SET-UP MENU
(☞ page 21).
10
Red screen
Green screen
Wave form monitor
t INPUT SELECT buttons/lamps
Selects an input.
SDI 1: Input from the E. AUDIO 3G SDI/HD SDI/
SD SDI (IN 1) terminal
SDI 2: Input from the E. AUDIO 3G SDI/HD SDI/
SD SDI (IN 2) terminal
DUAL LINK: Input from the E. AUDIO 3G SDI /HD SDI/
SD SDI (IN 1, IN 2) terminals
DVI: Input from the DVI-D (HDCP) terminal
COMPO.: Input from the COMPO. terminals
VIDEO: Input from the VIDEO terminal
● The lamp for the selected input lights.
y Power lamp
Off: The power is turned off
Green: The monitor is on
Orange: The monitor is turned off (standby)
Orange blinking: P.SAVE (Power saving) mode ("NO SYNC
ACTION" in "SYNC FUNCTION") (☞ page
17)
u
button
Turns on and off (on standby) the monitor.
●
The AC power switch is equipped on the rear panel of the
monitor (☞ 2 on page 8).