Using the blender to process
food
WARNING
Risk of injury!
Improper use may cause injuries.
Only use the appliance once it is
▶
fully assembled.
Never operate the appliance
▶
without fitting the lid.
Never place fingers in the attached
▶
blender jug.
WARNING
Risk of scalding!
Hot food may splash out during pro-
cessing and steam can escape from
the lid.
Add a maximum of 1000 ml of hot
▶
or frothing food.
Process hot food carefully.
▶
Do not lean over the appliance.
▶
Prepare the food.
1.
For example, cut up large items of
food.
Place the blender jug onto the
2.
base unit and rotate in a clockwise
direction until it locks into place.
→ Fig.
3
Add the food to the blender jug.
3.
→ Fig.
4
Observe the minimum and max-
imum processing quantities.
→ "Overview of recipes", Page 29
Insert the measuring jug in the lid
4.
and place the lid on the blender
jug.
→ Fig.
5
The lid must be completely closed.
Insert the mains plug.
6.
Set the rotary switch to the recom-
7.
mended speed.
→ Fig.
6
Process the ingredients until you
8.
achieve the required result.
To end the operation, set the rotary
9.
switch to .
Using instantaneous switch-
ing
Set the rotary switch to
1.
hold it there.
→ Fig.
7
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
a The rotary switch jumps to .
a Processing stops.
Adding more ingredients
During processing, remove the
1.
measuring jug and add the ingredi-
ents through the opening in the lid.
→ Fig.
8
To add larger quantities, set the
2.
rotary switch to .
Wait until the appliance stops.
3.
Remove the lid.
4.
→ Fig.
9
Add the ingredients.
5.
→ Fig.
9
Place the lid on the blender jug
6.
again and continue to process the
ingredients.
Emptying the blender jug
Requirement: The appliance has
stopped.
Turn the blender jug anti-clockwise
1.
and remove it from the base unit.
→ Fig.
10
To pour out all of the processed
2.
food, remove the lid.
→ Fig.
11
Basic operation en
and
27