Pressure Regulation; Using Cleaning Agents - Alto POSEIDON 1200 Instrucciones De Manejo

4.2.2 Switching on the
cleaner when it is
connected to open
tanks (suction mode)
4.3

Pressure regulation

4.4

Using cleaning agents

☞
0
I
M
Cleaning agents can be added
by means of the cleaning agent
injector (optional accessory).
1. Dilute cleaning agent
according to the
manufacturer's instructions.
2. Set the pressure to the
lowest setting on the spray
pipe.
NOTE!
Operate the spray gun several
times at short intervals to vent
the system.
The cleaner switches off
automatically twenty seconds
after the spray gun has been
closed. To start the cleaner
again, operate the spray gun.
1. Before connecting the
suction hose to the cleaner,
fill the hose with water.
2. Turn the main switch to
position M.
3. Unlock the spray gun and
operate it.
The cleaner automatically
switches off after pauses of
more than five minutes.
4. To start the cleaner again,
operate the main switch
again.
Max. suction height = 3 m.
1. Turn the twist grip on the
spray unit:
– clockwise (+) for high
pressure
– anticlockwise (–) for low
pressure.
3. The amount of cleaning
agent that is drawn in can be
regulated by turning the
dosing valve of the injector
(optional accessory).
CAUTION!
Never allow cleaning agent to
dry on the surface to be
cleaned as this may cause
damage.
31