Play video from your iPod/iPhone/iPad
1
Connect a composite video cable
(not supplied) to:
•
the
socket (yellow) on the
back of the device;
•
the composite video input socket
(yellow) on a TV.
2
In power-on mode, press
the top of the device or
the remote control repeatedly to
select the dock source.
☞
The display panel shows "iPod"
briefl y, and then returns to clock
display.
3
Start video play on your iPod/
iPhone/iPad.
☞
The video is played on the TV with
sound output from the docking
speaker.
4
Press
/
to adjust volume.
☞
The display panel shows the volume
level during volume adjustment.
5
Press
to pause or resume video
play.
NYNE NH-3000_User Manual_A5.indb 13
NYNE NH-3000_User Manual_A5.indb 13
To switch to video play on your iPod/iPhone/iPad:
•
Press and hold
To switch back to video play on the TV:
•
Press and hold
Listen to FM radio stations
Notes:
•
For optimal FM reception, fully
extend the fi xed FM antenna at the
back of the device.
•
To reduce interference, keep the
antennas away from any radiation
resources, such as the TV, or micro
oven.
Tune to a radio station
1
In power-on mode, press
the top of the device or
the remote control repeatedly to
select the FM tuner source.
on
☞
The display panel shows "FR" briefl y,
on
and then returns to clock display.
☞
The device tunes to the last tuned
radio station automatically.
2
Press and hold
frequency indication starts to
change, then release the button.
☞
The device tunes to a radio station
with strong signal reception
automatically.
Tips:
•
To tune to a weak radio station, you
can also press
to adjust the frequency step by
step.
.
again.
on
on
or
until the
or
repeatedly
EN
13
5/30/2012 9:37:08 PM
5/30/2012 9:37:08 PM