ASSEMBLY
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
NOTE! Only tighten the quick release knob so that it is possible to clamp the lever down with light
pressure. If the lever cannot be clamped, slightly loosen the quick release knob. If the lever can be
clapped without resistance, tighten the quick release knob.
WARNING!
Always remove the battery prior to changing blades. Failure to do so, can cause serious injury!
Attaching or Replacing TrimFast Blade (See figs. 9-11)
seeded on stud.
Fig.9
Fig.10
Fig.11
10