Accessories (Optional) - Jacto DJB-20S Manual Del Operador

• Lubricate the darker areas indicated in the figure below.
• Move the agitation lever to the vertical position as shown in figure B.
B)
Agitation lever
• Lubricate the darker areas indicated in the figure below at every 100 hours
of use.
10.2 Quick coupler maintenance and lubrication
• Disconnect the quick coupler and remove the dirt over the connector;
• Next, apply graphite-based grease around the connector sealing ring.
• Fit in the quick coupler.
NOTE: This procedure must be followed weekly.

11. Accessories (optional)

11.1. Anti-growth lance
Nº Code
1 1236093
11.1.1. Assembly instructions
1. Connect the anti-growth lance to the trigger valve.
2. Tighten enough to avoid leakage.
1
Description
ANTI-GROWTH LANCE
11.1.2. Use
The Tobacco lance is indicated for the application of anti-growth in tobacco.
11.2. Calibration jug
Nº Code
1 1269524
11.2.1. Use
Recommended for calibrating the application dose
11.3. Extension 600
Nº Code
1 1222729
11.3.1. Assembly instructions
1.
Disconnect the lance from the trigger valve.
2. Connect the trigger valve to the extension 600.
3. Connect the lance to the extension 600.
NOTE: It is recommended to use the nozzle JD-40 for a proper drench application.
11.3.2. Use
Recommended for extending the length of the boom to improve the drench ap-
plication.
Qty.
1
Description
CALIBRATION JUG
.
Description
EXTENSION 600
Qty.
1
Qty.
1
15/52