Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Spurs
1. Remove the faceplate [1] from the headstock spindle
using the two wrenches provided [2] to separate the
faceplate from the spindle nut. (Fig5)
2. Insert the headstock spur [3] in the spindle hole.
3. Insert the live center [4] in the
6)
4. To remove either the headstock spur or the tailstock
center insert the push-out rod [5] into the hole [6] at
the opposite end of the headstock or tailstock. Remove
and store the rod in a safe location after use.
WARNING! Do not operate your wood lathe until it is completely assembled and adjusted
according to the instructions.
Adjustments
Headstock (Fig 7)
1. The headstock has 5 preset positions, 0
spindle turning applications, 60
making face plate turnings, 180
turnings when using the extension bed and tool rest.
2. To set the headstock at the desired position, you must
first turn the head lock handle [2] until you have
completed at least one rotation. (Fig 8)
3. Pull out the headstock release [1], rotate the entire
headstock clockwise
headstock will be fixed in position when it clocks into one
of the five pre-set settings. Tighten the lock handle [2].
tailstock hole. (Fig
0
setting for all
0
0
0
/90
/120
for use when
0
for use for face plate
to the
desired position.
EN
The
６
Tabla de contenido
