Getting Started - KERN AGB Serie Instrucciones De Funcionamiento

Balanzas electrónicas de precisión y analíticas
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Getting Started

Storage and Shipping Conditions
– Do not expose the balance to extreme
temperatures, blows, shocks, vibration
or moisture.
Unpacking the Balance
After unpacking the balance, check it
immediately for any visible damage
$ If you see any sign of damage, proceed
as directed in the chapter entitled "Care
and Maintenance," under the section on
"Safety Inspection"
$ Save the box and all parts of the pack-
aging until you have successfully installed
your balance in case you need to return
it. Before packing your balance, unplug
all connected cables to prevent damage.
Equipment Supplied
– Balance
– Weighing pan
– Pan support (only on models with
a round weighing pan)
– AC adapter, plug type
Additionally supplied with AGB210-4,
AGB120-4 models:
– Shield ring
– Shield plate
– Dust cover
Additionally supplied with PGB310-3,
PGB150-3 models:
– Glass draft shield with cover
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com
34
Installation Instructions
When choosing a location to set up your
balance, observe the following:
– Avoid placing the balance in close
proximity to a heater or otherwise
exposing the balance to heat or direct
sunlight
– Protect the balance from drafts that come
from open windows or doors
– Avoid exposing the balance to extreme
vibrations during weighing
– Do not expose the balance to extreme
moisture over long periods
Conditioning the Balance
Moisture in the air can condense on the
surfaces of a cold balance whenever
it is brought into a substantially warmer
place. If you transfer the balance to a
warmer area, make sure to condition it
for about 2 hours at room temperature,
leaving it unplugged from AC power.
Seal on Balances Verified for Use in
Legal Metrology in the EU*:
EU legislation requires that a control
seal be affixed to the verified balance.
The control seal consists of a sticker
with the "KERN" logo. This seal will be
irreparably damaged if you attempt
to remove it. If the seal is broken, the
validity of the verification becomes null
and void, and you must have your
balance re-verified.
* Including the Signatories of the Agree-
ment on the European Economic Area
Tabla de contenido
loading

Tabla de contenido