Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating
Removing
residual matter from inside the water supply line after installing
a new
filter
[
Ice
I
Water
1, Turn ON the main water supply.
2, Press the Water button on the control
panel. Place a cup or glass under the
water outlet, and then push the cup or
glass against the dispenser
pad until
you hear a "click".
3, Flush 3 gallons of water through
the
filter.
(Flush approximately
6 minutes.)
This will clean the water supply system
and remove air from the lines.
4, Additional
flushing
may be required
in
some households.
5. Open the refrigerator
door and make
sure there are no water leaks coming
from the water filter.
_)
NOTE
• A newly installed
water filter cartridge
may cause water to briefly
spurt from
the water dispenser.
This is the result of air getting
into the
line.
It poses no problem
to the operation
of
the
refrigerator.
50
English
DA68-02981N-00.indb
50
2015.3.3.
OF] 9:34
Capítulos
Tabla de contenido
