JVC KD-DB912BT Manual De Instrucciones página 36

Audio Settings
[SUBWOOFER [SW LPF FRQ]
LPF]*2
[SW LPF SLOPE]
[SW LPF PHASE] [REVERSE] (180°)/ [NORMAL] (0°)
[SW LPF GAIN]
3-way crossover setting items
[SPEAKER SIZE]
[TWEETER] [SMALL]/[MIDDLE]/[LARGE]
[MID RANGE] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/[5×7]/
[6×8]/[6×9]
[WOOFER]*2 [16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE] (not connected)
[X ' OVER]
[TWEETER] [HPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/
[8KHZ]/[10KHZ]/[12.5KHZ]
[SLOPE] [–06DB]/[–12DB]
[PHASE] [REVERSE] (180°)/[NORMAL] (0°)
[GAIN] [–08DB] to [00DB]
28
ENGLISH
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]/[THROUGH]
[–06DB]/[–12DB]/[–18DB]/[–24DB]
[–08DB] to [00DB]
[MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/
[100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/
[THROUGH]
[HPF SLOPE] [–06DB]/[–12DB]
[LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/
[8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH]
[LPF SLOPE] [–06DB]/[–12DB]
[PHASE] [REVERSE] (180°)/[NORMAL] (0°)
[GAIN] [–08DB] to [00DB]
[WOOFER]*2 [LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/
[100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/
[THROUGH]
[SLOPE] [–06DB]/[–12DB]
[PHASE] [REVERSE] (180°)/[NORMAL] (0°)
[GAIN] [–08DB] to [00DB]
*1 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR]. (Page 26)
*2 Displayed only when [SUBWOOFER SET] is set to [ON]. (Page 25)