Replacing The Oven Ligh; Broiler Pan And Grid (Sold Separately); Oven Racks - Sears Kenmore Elite 721.7603 Serie Manual De Uso Y Cuidado

CARE AND CLEANING
J REPLACING THE OVEN LIGH
J
The oven light is a standard 40-watt appliance bulb. It
will turn on when the oven door is open. When the oven
door is closed, press the
WARNING:
• Make sure that the oven and bulb are cool.
• DISCONNECT the electrical power to the range at
the main fuse or circuit breaker panel. Failure to do so
can result in severe personal injury, death, or electrical
shock.
Unplug the range or disconnect power.
1
Turn the glass bulb cover in the back of the oven
2
counterclockwise to remove.
Turn the bulb counterclockwise to remove from
3
socket.
Insert the new bulb and turn it clockwise.
4
Insert the glass bulb cover and turn it clockwise.
5
Plug in the range or reconnect the power.
6
key to turn the light on or off.
J BROILER PAN AND GRID (SOLD
J
SEPARATELY)
NOTE: Remove the broiler pan and grid from the oven
before running the Self Clean cycle.
After broiling, remove the broiler pan from the oven.
1
Remove the grid from the pan.
Carefully pour out the grease from the pan into a
2
proper container.
Wash and rinse the broiler pan and grid in hot
3
water with a soap-filled or plastic scouring pad. If
food has burnt on, sprinkle the grid with cleaner
(while hot) and cover it with wet paper towels or
a dishcloth. Soaking the pan will remove burnt-
on foods. Both the broiler pan and grid may be
cleaned with a commercial oven cleaner. Both
the broiler pan and grid can also be cleaned in a
dishwasher.
J OVEN RACKS
J
Remove the oven racks before operating the Self Clean
cycle.
Food spilled into the tracks could cause the racks
1
to become stuck. Clean racks with a mild, abrasive
cleaner.
Rinse with clean water and dry.
2
NOTE: If the racks are cleaned using the Self Clean
cycle (not recommended), the color will turn slightly
blue and the finish will become dull. After the self clean
cycle is complete, and the oven has cooled, rub the
sides of the racks with wax paper or a cloth containing
a small amount of vegetable oil. This will make the
racks glide more easily into the rack tracks.
40